description these non-diffused lamps are designed to produce a bright light source and smooth radiation pattern. a slight tint is added to the lens for easy color identification. this lamp has been designed with a hlmp-c115, hlmp-c117, hlmp-c123, hlmp-c215, hlmp-c223, hlmp-c315, hlmp-c323, hlmp-c415, hlmp-c423, hlmp-c515, hlmp-c523, hlmp-c615, hlmp-c623 features very high intensity exceptional uniformity microtint lens for color identification consistent viewability all colors: algaas red high efficiency red yellow orange green emerald green ?5 and 25 family tape and reel options available binned for color and intensity applications ideal for backlighting front panels* used for lighting switches adapted for indoor and outdoor signs agilent t-1 3 / 4 super ultra-bright led lamps data sheet 20 mil lead frame, enhanced flange, and tight meniscus controls, making it compatible with radial lead automated insertion equipment.
2 selection guide part number luminous intensity iv (mcd) color 2 1/2[1] standoff leads hlmp- min. max. dh as algaas 15 no c115 290.0 c115-o00xx 290.0 c115-op0xx 290.0 1000.0 yes c117-op0xx 290.0 1000.0 25 no c123 90.2 c123-l00xx 90.2 red 15 no c215 138.0 c215-m00xx 138.0 c215-mn0xx 138.0 400.0 25 no c223 90.2 c223-l00xx 90.2 c223-mn0xx 138.0 400.0 yellow 15 no c315 147.0 c315-l00xx 147.0 c315-lm0xx 147.0 424.0 25 no c323 96.2 c323-k00xx 96.2 c323-kl0xx 96.2 294.0 orange 15 no c415 138.0 c415-m00xx 138.0 c415-m0d0xx 138.0 c415-mn0xx 138.0 400.0 25 no c423 90.2 c423-l00xx 90.2 c423-lm0xx 90.2 276.0 green 15 no c515 170.0 c515-l00xx 170.0 c515-lm0xx 170.0 490.0 25 no c523 69.8 c523-j00xx 69.8 c523-kl0xx 111.7 340.0 emerald green 15 no c615 17.0 c615-g00xx 17.0 25 no c623 6.7 c623-e00xx 6.7
3 part numbering system hlmp - c x xx - x x x xx mechanical options 00: bulk 01: tape & reel, crimped leads 02: tape & reel, straight leads b2: right angle housing, even leads uq: ammo pack, horizontal leads color bin options 0: full color bin distribution d: color bins 4 & 5 only maximum iv bin options 0: open (no maximum limit) others: please refer to the iv bin table minimum iv bin options please refer to the iv bin table viewing angle & standoffs options 15: 15 degree, without standoffs 17: 15 degree, with standoffs 23: 25 degree, without standoffs color options 1. as algaas red 2. high efficiency red 3. yellow 4. orange 5. green 6. emerald green package options c: t-1 3/4 (5 mm)
4 absolute maximum ratings at t a = 25 c high high dh as efficiency performance algaas red and green and parameter red orange yellow emerald green units dc forward current [1] 30 30 20 30 ma transient forward current [2] 500 500 500 500 ma (10 sec pulse) reverse voltage (ir = 100 a)5555 v led junction temperature 110 110 110 110 c operating temperature range ?0 to +100 ?5 to +100 ?0 to +100 c storage temperature range ?5 to +100 c wave soldering temperature 250 c for 3 seconds [1.59 mm (0.063 in.) from body] lead solder dipping temperature 260 c for 5 seconds [1.59 mm (0.063 in.) from body] notes: 1. see figure 5 for maximum current derating vs. ambient temperature. 2. the transient current is the maximum nonrecurring peak current the device can withstand without damaging the led die and wir e bond. package dimensions hlmp-cx15 and hlmp-cx23 hlmp-cx17 1.14 0.20 (0.045 0.008) 5.80 0.20 (0.228 0.008) 5.00 0.20 (0.197 0.008) 31.60 (1.244) min. 0.70 (0.028) max. 1.00 (0.039) min. 8.71 0.20 (0.343 0.008) 2.54 0.38 (0.100 0.015) 0.50 0.10 (0.020 0.004) sq. typ. notes: 1. all dimensions are in millimeters (inches). 2. leads are mild steel, solder dipped. 3. an epoxy meniscus may extend about 0.5 mm (0.020 in.) down the leads. cathode lead 1.85 (0.073) max. cathode flat (note 1) 1.14 0.20 (0.045 0.008) 5.80 0.20 (0.228 0.008) 5.00 0.20 (0.197 0.008) 31.60 (1.244) min. 0.70 (0.028) max. 1.00 (0.039) min. 8.71 0.20 (0.343 0.008) 2.54 0.38 (0.100 0.015) 0.50 0.10 (0.020 0.004) sq. typ. cathode lead cathode flat 1.50 0.15 (0.059 0.006) 12.60 0.18 (0.496 0.007)
5 electrical characteristics at t a = 25 c forward reverse capacitance speed of response voltage breakdown c (pf) thermal s (ns) vf (volts) vr (volts) vf = 0 resistance time constant @ if = 20 ma @ ir = 100 a f = 1 mhz r j-pin e -t/ s part number typ. max. min. typ. ( c/w) typ. hlmp-c115 1.8 2.2 5 30 210 30 hlmp-c117 hlmp-c123 hlmp-c215 1.9 2.6 5 11 210 90 hlmp-c223 hlmp-c315 2.1 2.6 5 15 210 90 hlmp-c323 hlmp-c415 1.9 2.6 5 4 210 280 hlmp-c423 hlmp-c515 2.2 3.0 5 18 210 260 hlmp-c523 hlmp-c615 2.2 3.0 5 18 210 260 hlmp-c623 optical characteristics at t a = 25 c luminous color, viewing intensity peak dominant angle luminous iv (mcd) wavelength wavelength 2 1/2 efficacy @ 20 ma [1] peak (nm) d [2] (nm) (degrees) [3] v part number min. typ. typ. typ. typ. (lm/w) hlmp-c115 290 600 645 637 11 80 hlmp-c117 hlmp-c123 90 200 26 hlmp-c215 138 300 635 626 17 145 90 170 23 hlmp-c315 146 300 583 585 17 500 96 170 25 hlmp-c415 138 300 600 602 17 380 90 170 23 hlmp-c515 170 300 568 570 20 595 69 170 28 hlmp-c615 17 45 558 560 20 656 627 28 notes: 1. the luminous intensity, iv, is measured at the mechanical axis of the lamp package. the actual peak of the spatial radiation pattern may not be aligned with this axis. 2. the dominant wavelength, d , is derived from the cie chromaticity diagram and represents the color of the device. 3. 2 1/2 is the off-axis angle where the luminous intensity is 1/2 the on-axis intensity.
6 figure 1. relative intensity vs. wavelength. figure 2. forward current vs. forward voltage (non-resistor lamp). figure 3. relative luminous intensity vs. forward current. orange high efficiency red wavelength nm relative intensity 1.0 0.5 0 500 550 600 650 700 750 yellow emerald green high performance green t a = 25 c ts algaas red dh as algaas red i f forward current ma 1.0 3.5 300.0 5.0 0.1 v f forward voltage v 1.5 2.0 2.5 3.0 10.0 2.0 1.0 0.2 0.5 0 0.5 20.0 50.0 100.0 200.0 dh as algaas red ts algaas red 0 100 80 60 40 20 i f forward current ma 2.0 4.0 3.0 1.0 v f forward voltage v 0 5.0 yellow high efficiency red, orange, yellow, and high performance green, emerald green high efficiency red/orange high performance green, emerald green relative luminous intensity (normalized at 20 ma) 0.1 0.01 i f dc forward current ma 15 5.0 0.2 0.05 0.2 2 50 1.0 10 0.02 0.1 0.5 2.0 0.5 20 30 dh as algaas red ts algaas red relative luminous intensity (normalized at 20 ma) 0 0 i dc dc current per led ma 10 20 1.6 0.8 0.4 515 30 1.2 25 0.2 0.6 1.0 1.4 her, orange, yellow, and high performance green, emerald green
7 figure 5. maximum forward dc current vs. ambient temperature. derating based on t j max = 110 c. figure 4. relative efficiency (luminous intensity per unit current) vs. peak current. figure 6. relative luminous intensity vs. angular displacement. 15 degree family. relative efficiency (normalized at 20 ma) 0 i peak peak forward current ma 0 0.6 0.8 300 20 100 1.2 1.0 0.2 0.4 50 200 10 dh as algaas red peak relative efficiency (normalized at 20 ma) 0 i peak peak forward current ma 0.4 0.6 0.8 1.0 90 20 70 50 40 1.3 1.1 high performance green yellow high efficiency red/orange her, orange, yellow, high performance green, emerald green 0.5 0.7 0.9 1.2 30 60 80 10 emerald green i f forward current ma 0 0 t a ambient temperature c 40 80 40 20 10 20 60 30 100 5 15 25 35 dh as algaas red r ja = 559 c/w r ja = 689 c/w i f forward current ma 0 0 t a ambient temperature c 40 80 40 20 10 20 60 30 100 5 15 25 35 her, orange, yellow, and high performance green, emerald green r ja = 470 c/w r ja = 705 c/w r ja = 300 c/w yellow her, orange, green, emerald green normalized luminous intensity 1 0 angular displacement degrees 0.8 0.6 0.5 0.7 0.2 45 0.1 0.3 0.4 40 35 30 25 20 10 5 0 15 -5 -10 -15 -20 -25 -30 -35 -40 -45 0.9
8 figure 7. relative luminous intensity vs. angular displacement. 25 degree family. intensity bin limits intensity range (mcd) color bin min. max. l 101.5 162.4 m 162.4 234.6 n 234.6 340.0 o 340.0 540.0 p 540.0 850.0 q 850.0 1200.0 r 1200.0 1700.0 red/orange s 1700.0 2400.0 t 2400.0 3400.0 u 3400.0 4900.0 v 4900.0 7100.0 w 7100.0 10200.0 x 10200.0 14800.0 y 14800.0 21400.0 z 21400.0 30900.0 l 173.2 250.0 m 250.0 360.0 n 360.0 510.0 o 510.0 800.0 p 800.0 1250.0 yellow q 1250.0 1800.0 r 1800.0 2900.0 s 2900.0 4700.0 t 4700.0 7200.0 u 7200.0 11700.0 v 11700.0 18000.0 w 18000.0 27000.0 normalized luminous intensity 1 0 angular displacement degrees 0.8 0.6 0.5 0.7 0.2 45 0.1 0.3 0.4 40 35 30 25 20 10 5 0 15 -5 -10 -15 -20 -25 -30 -35 -40 -45 0.9
9 color categories lambda (nm) color category # min. max. 6 561.5 564.5 5 564.5 567.5 green 4 567.5 570.5 3 570.5 573.5 2 573.5 576.5 1 582.0 584.5 3 584.5 587.0 yellow 2 587.0 589.5 4 589.5 592.0 5 592.0 593.0 1 597.0 599.5 2 599.5 602.0 3 602.0 604.5 orange 4 604.5 607.5 5 607.5 610.5 6 610.5 613.5 7 613.5 616.5 8 616.5 619.5 tolerance for each bin limit is 0.5 nm. intensity bin limits, continued intensity range (mcd) color bin min. max. e 7.6 12.0 f 12.0 19.1 g 19.1 30.7 h 30.7 49.1 i 49.1 78.5 j 78.5 125.7 k 125.7 201.1 l 201.1 289.0 green/ m 289.0 417.0 emerald green n 417.0 680.0 o 680.0 1100.0 p 1100.0 1800.0 q 1800.0 2700.0 r 2700.0 4300.0 s 4300.0 6800.0 t 6800.0 10800.0 u 10800.0 16000.0 v 16000.0 25000.0 w 25000.0 40000.0 maximum tolerance for each bin limit is 18%.
note: all categories are established for classification of products. products may not be available in all categories. please contact your local agilent representative for further clarification/information. mechanical option matrix mechanical option code definition 00 bulk packaging, minimum increment 500 pcs/bag 01 tape & reel, crimped leads, minimum increment 1300 pcs/bag 02 tape & reel, straight leads, minimum increment 1300 pcs/bag b2 right angle housing, even leads, minimum increment 500 pcs/bag uq ammo pack, horizontal leads, in 1k minimum increment www.agilent.com/semiconductors for product information and a complete list of distributors, please go to our web site. for technical assistance call: americas/canada: +1 (800) 235-0312 or (916) 788-6763 europe: +49 (0) 6441 92460 china: 10800 650 0017 hong kong: (+65) 6756 2394 india, australia, new zealand: (+65) 6755 1939 japan: (+81 3) 3335-8152 (domestic/interna- tional), or 0120-61-1280 (domestic only) korea: (+65) 6755 1989 singapore, malaysia, vietnam, thailand, philippines, indonesia: (+65) 6755 2044 taiwan: (+65) 6755 1843 data subject to change. copyright ?2004 agilent technologies, inc. obsoletes 5965-6165e november 11, 2004 5988-2149en
|
